Tanning Bed Repair in Ellenwood, GA
When your tanning bed stops working, it throws off the whole day. Our technicians repair tanning beds in Ellenwood, GA, starting with a proper diagnosis and an upfront quote before any work begins.
- Upfront quote before work
- 90-day parts & labor warranty
- Parts matched to your model
- Same-day service when available
How we repair your Tanning Bed
A tanning bed is a clamshell or stand-up unit that exposes the skin to ultraviolet light from rows of lamps, cooled by internal fans and controlled by a timer. A tanning bed usually depends on a motor or lamps, timers or controls, safety switches and a power supply. A technician tests power and controls, motors or lamps, and safety devices.
Tanning Bed repair at a glance
- Typical repair cost$100–$450
- Typical service life8–15 years
- Warranty on repairs90 days parts & labor
- QuoteUpfront, before work
- Same-day visitsWhen available
Common Tanning Bed problems we fix
What usually causes each symptom, and what our technician checks to confirm it.
Cracked or cloudy acrylic
- Likely causes
- Cleaning with the wrong chemicals, age, or heat stress.
- What our technician checks
- The acrylic is inspected for cracks and replaced if damaged.
Bed overheating
- Likely causes
- A failed cooling fan, a clogged intake filter, or the bed placed in a small room with no ventilation.
- What our technician checks
- Fan operation, filters and room ventilation are checked.
Weak tan results
- Likely causes
- Lamps used past their rated hours, dirty acrylic shield, or a failing ballast.
- What our technician checks
- Lamp hours and UV output are checked and the acrylic is inspected.
Lamps will not light
- Likely causes
- A failed ballast, worn starters, a faulty timer or a tripped breaker.
- What our technician checks
- The technician tests the ballast output, starters and timer and checks the dedicated circuit.
Some lamps out or flickering
- Likely causes
- Lamps at the end of their life, failed starters, or loose lamp sockets.
- What our technician checks
- Lamps, starters and sockets are swapped and tested to find the fault.
Timer does not start or shut off
- Likely causes
- A failed timer, a faulty relay or a wiring problem.
- What our technician checks
- The timer and relay are tested for proper operation.
Quick checks you can do safely
- Check the breaker on the dedicated circuit.
- Clean the acrylic with the cleaner the manual recommends.
- Make sure the cooling fan intakes are clear.
- Note how many hours the lamps have been used.
- Leave space around the bed for ventilation.
Safety first: UV exposure can burn skin and eyes, so always wear approved eyewear and do not exceed recommended session times.
Still not working?
Call and describe what you see and hear, plus any error code. It helps the technician bring the right parts on the first visit.
(844) 442-1999Seeing a code? Try our error code lookup or troubleshooting wizard.
Our 5-step tanning bed repair process
- Call or book onlineTell us the appliance, brand and what it is doing. We confirm a visit window that works for you.
- DiagnosisThe technician inspects and tests the tanning bed to find the actual cause, not just the symptom.
- Upfront quoteYou get a clear price before any work starts. No surprise charges.
- RepairWe fix it with parts matched to your model, often on the same visit when the part is on the truck.
- Test and warrantyWe test the unit under normal operation, clean up and back the repair with a 90-day parts-and-labor warranty.
Tanning Bed repair cost and lifespan
National ballpark estimates. Your exact price depends on the part and labor, and you get it upfront after diagnosis. On the fence? Try the repair vs replace calculator.
Parts we replace most often
- UV lamps
- Ballast
- Starters
- Timer
- Cooling fan
- Acrylic shield
- Lamp sockets
We match every part to your model and serial number.
Keep your Tanning Bed running longer
- Replace lamps as a full set at their rated hours.
- Keep the cooling fans and filters clean.
- Check lamp sockets for heat damage during lamp changes.
- Run the bed only on its dedicated circuit.
- Clean the acrylic after each use with an approved cleaner.
Build a maintenance plan
Create a printable monthly, quarterly and yearly checklist for every appliance in your home.
Open the schedule generatorTanning Bed repair in Ellenwood, GA
Hot, humid summers and mild winters in Georgia keep refrigerators, laundry machines and ovens in Ellenwood in steady use.
We provide tanning bed repair throughout Ellenwood, including ZIP code 30294, and in nearby Rex, Conley and Morrow.
Tanning Bed brands we repair
Frequently Asked Questions
How much does tanning bed repair cost in Ellenwood, GA?
Most tanning bed repairs fall roughly between $100 and $450, depending on the part and labor involved. That is a national ballpark estimate; you get an exact quote after diagnosis and before any work starts.
Can you repair my tanning bed the same day?
Often, yes. Call (844) 442-1999 early in the day and we will try to schedule a same-day visit. Same-day service depends on technician availability and whether the part is in stock.
Is the repair guaranteed?
Yes. Completed repairs are covered by a 90-day parts-and-labor warranty. If the same problem comes back in that time, we come back and fix it.
Which brands do you service?
We work on all major brands, including ESB, SunQuest and Wolff.
Should I repair or replace my tanning bed?
A typical tanning bed lasts about 8 to 15 years. If yours is well within that range and the repair costs less than half the price of a new one, repair is usually the better value. Our technician will tell you honestly if replacement makes more sense.
Other specialty equipment repairs
More repair services
- Refrigerator Repair
- Washing Machine Repair
- Dryer Repair
- Dishwasher Repair
- Oven Repair
- Range Repair
- Microwave Repair
- Ice Maker Repair
- KitchenAid Range Hood Repair
- Navien Instant/on-Demand Water Heater Repair
- Scotsman Ice Maker Repair
- Star Vertical Contact Toaster Repair
- Whirlpool Range Hood Repair
- Ring Intercom System Repair
Get your tanning bed fixed in Ellenwood
Upfront quote before work starts · Parts matched to your model · 90-day warranty